Installing FHEM on the Raspberry Pi
Outlook
You have completed the basic installation of FHEM. Aside from some minor inconveniences, it is a fairly straightforward task to install this software on a Rasp Pi that has a fresh setup. Note that the FHEM Rasp Pi generally requires a network connection, because you need to access the FHEM front end to control the system.
The connection is likewise important for maintaining a correct system time. The Rasp Pi does not come with a real-time clock, so Raspbian has to load the time from the Internet when the system starts. With no connection, the time will not be correct, and time-controlled FHEM actions will not work properly.
Your network is now ready for the addition of interfaces for the sensors and actuators that you will use to automate your home.
Infos
- Raspbian: https://www.raspberrypi.org/downloads/raspbian/
- Address resolution protocol: https://en.wikipedia.org/wiki/Address_Resolution_Protocol
- Adafruit Raspberry Pi Finder: https://github.com/adafruit/Adafruit-Pi-Finder
- PuTTY: http://www.putty.org
- FHEM: http://fhem.de
- Base64 decode and encode: https://www.base64encode.org
« Previous 1 2 3 Next »